Troubleshooting Your Air Conditioner: What You Need to Know

If your air conditioner is not functioning properly, knowing the cause can save you thousands of money. You don’t need t be an expert to identify what’s wrong with your AC units. In fact, you can check it on your own without harming you would cause damage to the cooling unit. Here are the following troubleshooting techniques every homeowner must know.

  1.    Check the thermostat of the unit

Should you notice that your air conditioning unit is not cooling anymore, it is best to check the thermostat of the unit immediately. If it’s set correctly, you can proceed to clean the air filters to let more air into the system and improve the coolness of the air. However, if nothing works after that, it is best to call a professional because this can indicate a more complicated problem.

  1.    Clean the air filters

As what we’ve mentioned above, cleaning the air filters is important. If your air conditioning unit is not generating enough air pressure because too much dirt had accumulated in the air filter, you need to clean or replace it as soon as possible. Some cases require the AC unit itself to be cleaned thoroughly to address the issue.

  1.    Regular inspection

Regular inspection is a must, especially if you start hearing weird noises in your air conditioning unit. It can indicate a problem on the system itself. A thorough inspection can help to identify the root cause. Just make sure that you prepare the right tools for doing the job.

  1.    Check for faulty wires

If your air conditioning unit doesn’t turn on, you must check for any bad wiring immediately. Some power issues can also lead this problem. You can also check out the main electrical panel itself because there might be a blown fuse you did not notice. Resetting the breaking and replacing the fuse should solve the problem.

  1.    Clean the condensate drain

The air conditioning units generate water by removing the moisture from the system. Now, there is a drain pipe that removes the water from it. However, over time it can accumulate dirt and algae inside the pipe. These algae clog the pipes to the point that your unit stops working anymore.

Excess water can puddle just around your unit or cause the area to flood. That’s why it is important to clean the condensate drain. But if it still doesn’t work you should call a professional already because if this issue is left neglected for too long, it can cause serious and irreparable damage to the system itself.

Knowing the basic troubleshooting techniques will help you to save a lot of time and money figuring out why your air conditioning is not working properly. Try these methods first and if it still doesn’t work or you couldn’t figure out the problem, it is best to look for an experienced professional check and repair your air conditioning unit already before you could cause something that will deteriorate the condition. You can find more about more reasons here to troubleshoot your unit and how to choose the best aircon.


Leave a Reply

Your email address will not be published. Required fields are marked *